Average Reviews:
(More customer reviews)I spent a lot of time researching different bed covers for my 2010 Toyota Tundra Double Cab and I new I didn't want one of those solid bed covers that gets in the way when trying to carry anything in the bed.This bed cover is perfect.It allows for the bed to be covered and secure while allowing for large items to be carried in the bed without having to remove the cover.I bought the HD version and while it claims that a person can stand on the cover while closed I haven't tested that claim.The biggest problem I had with the installation were the drain tubes which go through the front wall of the bed.After a little work and patience the tubes got installed and work as advertised.After going through some rain I have noticed a small amount of water in the bed.Upon further investigation it looks like the water is coming in through the gap between the tailgate and the truck bed therefore not the fault of the bed cover.I would definitly buy this item again.
Click Here to see more reviews about: BAK Industries 35410 BakFlip HD All Metal Tonneau Bed Cover
Product Description:
The BAKFlip HD (Heavy Duty) Tonneau Cover / Truck Bed Cover has all of the great good looks and functionality of the BAKFlip G2 (Generation 2) Model but in a Heavy Duty / OEM (Factory) Quality version as this cover's outer surfaces are ALL METAL like the BAKFlip G2! However, the core of the BAKFlip HD Tonneau Cover / Truck Bed Cover is 25% more dense, 1/8" thicker and is much more rigid then the G2. The BAKFlip HD opens, closes, and operates identically to the BAKFlip G2 Model, however the BAKFlip HD has the following refinements: Panels on HD are 5/8" thick vs 1/2" thick for the G2 .The BAKFlip HD's textured flat aluminum surfaces on all panels have two coats of epoxy primer that is baked on at 460 degrees. This entire expoxy primer coating process is completed twice (first coat applied, baked on and cooled, and then the process is repeated). Once the two coats of primer has set, an extraordinarily tough and scratch-resistant polyester based coating is used as the final finishing coat (which gives the look of a tough, baked on enamel, but is much higher quality). This coating process ensures that the covers is both scratch and UV resistant. The 2 stage enamel process makes for a final finishing coat that is more of a factory look. The BAKFlip HD handles approximately 25% more distributed weight when compared to the G2. The HD is much more rigid then the G2. Quality and Rigidity Standards Endorsed by OEM - The BAKFlip HD is an Original Equipment Part for one of the Big 3 Automakers 2 year warranty for the BAKFlip HD vs. 1 year warranty for the BAKFlip G2. Powder coated pivoting arms - (G2 has zinc plated) Integrated tie down points underneath and on top of the cover ("D" Rings placed at strategic points under the cover). Extra Set of Clamps (8 clamps) provided for added rigidity (4 on each side). The G2 uses a total of 6 clamps. The BAKFlip HD has a higher quality finished look when compared to the BAKFlip G2 because of the 2 stage epoxy primer on the HD.
Get 28% OFF
Want to read more honest consumer review about BAK Industries 35410 BakFlip HD All Metal Tonneau Bed Cover now ?
0 comments:
Post a Comment